Science & Research

Antenna Testing for NASA’s SkyFall Mission at JPL

1 min read
Antenna Testing for NASA’s SkyFall Mission at JPL
AI-generated illustration
This article was produced with AI assistance and editorially curated from public sources.

Antenna Testing for the SkyFall Mission at JPL

As part of the preparations for NASA’s SkyFall mission, engineers at the Jet Propulsion Laboratory in Southern California are conducting antenna tests in the facility’s electromagnetic interference (EMI) chamber. The test article is a ground‑penetrating radar antenna that forms part of the mission’s science payload.

Engineer Maya Román attaches the antenna to a coaxial cable to monitor signal integrity during the measurements. The setup is performed inside the EMI chamber of the Environmental Test Lab to suppress external interference and obtain accurate antenna pattern data.

To reduce reflections and self‑interference, the antenna is pointed upward during the test. This orientation minimizes multipath effects within the chamber and yields a cleaner measurement of the antenna’s radiation characteristics.

Each antenna unit carries four instruments that operate simultaneously to collect data. The results will be used to verify the radar system’s performance and to make any necessary adjustments before launch.

Frequently asked questions

Was ist das Ziel des Antennentests bei der JPL?

Der Test soll die Leistungsfähigkeit des Bodenradars von SkyFall überprüfen und Störquellen minimieren.

Wer führt den Antennentest durch?

Die Prüfung wird von Ingenieurin Maya Román im Environmental Test Lab des Jet Propulsion Laboratory durchgeführt.

Wo genau findet der Test statt?

Der Test erfolgt in der elektromagnetischen Interferenzkammer (EMI‑Kammer) des JPL in Südkalifornien.